Sorry, you need to enable JavaScript to visit this website.
Skip to main content

Jet Fuel Test Fuel

Use this form to create specifications for a made-to-order Jet Fuel. Upon confirming whether or not the fuel can be produced, a written quote with earliest availability and pricing will be provided by our Sales and Customer Service.


Volume needed for this inquiry

Volume needed long term


Typical Tests Used to Certify Jet Fuels

Identify the Minimum and Maximum values and the tests where Report values are needed. No test will be ran if a Report or Minimum and Maximum Value is not identified. Use a TDS from an existing performance fuel to help establish the desired data.


Property: Color, Saybolt
Test Method: ASTM D 156


Property: Specific Gravity 60/60 ºF
Test Method: ASTM D 4052


Property: API Gravity
Test Method: ASTM D 1298


Property: Conductivity, pS/m
Test Method: ASTM D 2624


Property: Total Acidity, mg KOH/g
Test Method: ASTM D 3242


Property: Corrosion, 2h at 212º F
Test Method: ASTM D 3242


Property: Particulate Matter, mg/L
Test Method: ASTM D 5452


Property: Existent Gums, mg/100 mL
Test Method: ASTM D 381


Property: Doctor Test
Test Method: ASTM D 235


Property: Mercaptan Sulfur, ppm
Test Method: ASTM D 3227


Property: Freeze Point
Test Method: ASTM D 2386


Property: Smoke Point, mm
Test Method: ASTM D 1322


Property: Water Reduction Interface
Test Method: ASTM D 1094


Property: Sulfur, ppm
Test Method: ASTM D 5453


Property: Viscosity at 20ºC, cSt
Test Method: ASTM D 445


Property: Reid Vapor Pressure, psia
Test Method: ASTM D 5191


Property: Hydrogen Content, wt%
Test Method: ASTM D 3343


Property: Net Heat of Combustion, Btu/lb
Test Method: ASTM D 3338


Property: MSEP before and/or after additives
Test Method: ASTM D 3948


Property: Filtration Time in Minutes
Test Method: MILDTL 83133E


Property: JFTOT Tube Color Test
Test Method: ASTM D 3241


Property: JFTOT ^P, mm Hg
Test Method: ASTM D 3241


Property: Anti-Icing, vol%
Test Method: ASTM D 3338


Property: Antioxidant, lMbbl
Test Method: ASTM D 1319


Property: Corrosion Inhibitor, lbs/Mbbl


Property: Loss Residue


Property: Distillation Range at 760 mmHg, ºF
Test Method: ASTM D 86


Property: Initial Boiling Point at 10%

Property: Initial Boiling Point at 50%

Property: Initial Boiling Point at 90%

Property: Initial Boiling Point at End Point


Property: Hydrocarbon Type, vol% (Aromatics)
Test Method: ASTM D 1319

Property: Hydrocarbon Type, vol% (Olefins)
Test Method: ASTM D 1319

Property: Hydrocarbon Type, vol% (Saturates)
Test Method: ASTM D 1319


You are required to check the "I agree to the Chevron Phillips Chemical Terms and Conditions" checkbox before submitting. Read more about our Terms and Conditions.